-
Step 1: Decide What "Solar" Means for Your Customer
-
Step 2: Match the Inverter to the Panel (Yes, Actually Do the Math)
-
Step 3: Verify Certifications and Compliance Documents
-
Step 4: Get a Wholesale Quote That Includes Everything
-
Step 5: Order Samples Before You Commit to a Bulk Order
-
Step 6: Plan Receiving Inspection and Storage
-
Common Mistakes I See (and Have Made)
When I started ordering renewable energy equipment for our company, I figured it would be like buying office supplies. Get a quote, place an order, done. Then I learned about MPPT ranges and temperature coefficients the hard way.
You're probably here because you're a distributor, installer, or B2B buyer looking at Generac solar inverters and PV modules. Maybe you're placing your first order—or a small test order that could grow. This checklist is for you. It's based on my own procurement experience, including mistakes that cost me time and money.
Here's the 6-step process I now use for every Generac solar order, whether it's a sample of two panels or a full container. It's not a replacement for engineering review—it's a practical layer that keeps you from making expensive assumptions.
Step 1: Decide What "Solar" Means for Your Customer
This sounds obvious, but it's not. Are you selling a hybrid system? Grid-tied? Do you need battery storage compatibility? Generac makes both hybrid inverters and microinverters. The panel you choose—like the GS100—needs to match the inverter's input voltage range.
Most buyers start with price. Start with application. Because the same inverter family can have completely different internal components depending on whether it's configured for energy storage or grid-tied PV.
Checklist:
- Determine system type: hybrid, grid-tie, off-grid
- Confirm required output (kW) per phase
- Choose panel wattage and efficiency
- Verify battery compatibility if you're pairing storage
I once assumed "solar inverter" was a single product category. It's not. That assumption cost me an entire order that had to be re-specified (and a very unpleasant conversation with my operations director).
Step 2: Match the Inverter to the Panel (Yes, Actually Do the Math)
Every PV module has an open-circuit voltage (Voc) that changes with temperature. In cold weather, Voc goes up. If your inverter's maximum input voltage is too low, you'll fry it on a sunny winter morning.
This is the step that most installers get—but procurement people often skip it because it's not on the first page of the spec sheet. Generac publishes a compatibility document. Use it. Don't rely on the online configurator alone, because it often shows typical combinations, not edge cases.
Checklist:
- Compare panel Voc (at coldest expected temp) to inverter max input voltage
- Verify MPPT range overlaps with panel operating voltage
- Check max input current
- Get written confirmation from Generac or your distributor if unsure
When I compared our first Generac order with a previous supplier's quote side by side, I realized the cheaper system had a 600V inverter paired with a panel that could push 650V in cold conditions. That's not a risk I'll take again.
Step 3: Verify Certifications and Compliance Documents
For commercial orders, you need a paper trail. Not just for your own quality, but for your customer's permits, inspections, and warranties. The key certifications for PV modules are IEC 61215 and IEC 61730. Inverters should have UL 1741 or local equivalent.
If a supplier can't provide these documents before you order, walk away. They might still be legitimate, but you don't want to be the one explaining to your buyer why the system can't be interconnected. Even small utility companies now require compliance evidence before signing off.
Checklist:
- IEC 61215 / IEC 61730 certificates for PV modules
- UL 1741 (or local equivalent) for inverters
- Declaration of Conformity (CE if applicable)
- Warranty terms (product and performance) in writing
One thing I learned: certificates can expire or be updated. Check the revision date, not just the certificate number. In 2024, I nearly accepted an inverter with an outdated compliance sticker that was still in the supplier's inventory. (Thankfully, I checked before it shipped.)
Step 4: Get a Wholesale Quote That Includes Everything
Here's where my office-supply brain fails me again. I used to ask for "price per watt" and compare quotes. That's like comparing cars by just looking at engine size. You need the full ownership cost.
Ask for a quote that itemizes:
- Unit prices for panels, inverters, and accessories (monitoring, cables, connectors)
- Payment terms and minimum order quantity
- Lead time and shipping terms (FOB, CIF, DDP)
- Warranty claim process and RMA details
- What's NOT included (pallet fees, customs brokerage, etc.)
Most buyers focus on per-unit pricing and completely miss set-up fees, freight, and customs that can add significantly to the total—in my experience, sometimes as much as 15–30%. Get it all in writing before you commit. (We got burned on this in 2023—never again.)
Step 5: Order Samples Before You Commit to a Bulk Order
Even for wholesale, order a sample kit—maybe two panels and one inverter—before ordering 500 units. This is what I wish I'd done on my first solar contract. I approved a spec sheet, not a product. The delivered product looked different in a critical way: the DC connectors weren't the type we specified.
As a small buyer, you'd think samples aren't available. Not true. Good suppliers—including Generac's distribution network—expect this. Small doesn't mean unimportant; it means potential. If a supplier treats a sample order badly, they'll treat your larger order worse.
Checklist:
- Order minimal samples first (e.g., 2 PV modules, 1 inverter)
- Physically inspect connectors, labels, serial numbers
- Test communication with monitoring platform (if possible)
- Confirm warranty registration process
Step 6: Plan Receiving Inspection and Storage
When the shipment arrives, don't just count boxes. Inspect before signing. Note any damage on the delivery receipt. For inverters, check for signs of moisture or rough handling. For panels, look for micro-cracks—they may not be visible but can be caused by poor packaging.
Also, think about storage. PV modules should be stored upright in a dry place. I once left panels in a warehouse with poor ventilation for two weeks; the packaging condensed moisture (this was back in 2022). Nothing failed, but it wasn't a comfortable feeling.
Checklist:
- Inspect packaging for damage before delivery acceptance
- Count and verify serial numbers against packing list
- Store panels upright, inverters indoors
- Check for moisture or condensation
Common Mistakes I See (and Have Made)
- Only comparing price per watt. Include durability, warranty, efficiency, and real-world performance.
- Assuming "compatible" means plug-and-play. Check the specs yourself—ultimately, you're the one accountable if something fails.
- Ignoring the total cost of ownership. A slightly cheaper panel with 0.5% higher degradation can cost your customer more in the long run.
- Ordering before verifying certifications. You'll need them later anyway, and retroactively validating is a headache.
People think expensive vendors deliver better quality. Actually, vendors who deliver quality can charge more. The causation runs the other way. Same goes for suppliers: one that responds quickly to a small order is likely to be a partner, not just a vendor.
That's it. Six steps, a few mistakes avoided, and hopefully you'll get your Generac order right the first time. If you've been managing solar procurement for a while, I'm sure you've seen your own version of these. Feel free to share yours.